1.Xiangxi silicone masterbatch EVA anti-abrasion agent:
A. Sole anti-abrasion agent:
Silicone masterbatch sole EVA anti-abrasion agent is a silicone masterbatch designed specifically to enhance the wear resistance of EVA soles. It combines the excellent performance of silicone and the characteristics of EVA material, significantly improving the service life and performance of shoes by improving the wear resistance and scratch resistance of the sole.
B. Main components
Silicone masterbatch: a functional masterbatch that uses organic polysiloxane as the active ingredient and various thermoplastic plastics as carriers.
C. Performance characteristics
Significantly improves wear resistance: By adding silicone masterbatch, The wear resistance of EVA sole has been significantly improved, effectively extending the service life of the sole.
Enhanced scratch resistance: The addition of silicone masterbatch makes the sole more resistant to daily scratches and keeps the upper clean.
Good self-cleaning performance: Silicone masterbatch can improve the self-cleaning performance of the sole and reduce dirt adhesion.
Not affecting mechanical properties: Compared with traditional additives, this wear-resistant agent will not reduce the mechanical properties of EVA soles, such as elasticity and flexibility.
Optimizing processing performance: Silicone masterbatch can improve the flowability of thermoplastic resin in the molten state, reduce processing energy consumption, and improve production efficiency.
D. Recommended addition quantity
The general recommended addition amount is 1% to 5% of the total weight of EVA material. The specific amount of addition should be adjusted according to product requirements and manufacturing processes to achieve optimal results.
E.Usage
Mix the silicone masterbatch wear-resistant agent with EVA material in a certain proportion evenly.
Heat and press the EVA sole through the normal manufacturing process.
F. Precautions
Strictly control the amount of wear-resistant added to avoid excessive or insufficient impact on performance.
Pay attention to safe operation during use and avoid direct contact with skin and eyes.
Store in a dry, cool, and ventilated place, avoiding direct sunlight and high temperature environments.
Silicone masterbatch sole EVA anti-abrasion agent significantly improves the wear resistance and service life of EVA soles through its unique composition and performance characteristics, and is an important additive in the footwear industry.
2.How xiangxie check sole EVA anti-abrasion agent:
A. Sample preparation and labeling
Sampling: Use a sampling tank for sampling, ensuring that the sampling tank is labeled and covered with two layers of sampling plastic bags.
Sampling operation: Unscrew the cover of the sampling port, first release a portion of the raw materials that are stuck in the front section of the sampling port, and then sample as needed (usually 1/3 of the sampling bag). After completion, tighten the sampling plastic bag and select the lid of the sampling tank to complete the sampling process.
B.Appearance and basic performance inspection
Appearance inspection: Check the appearance of the sole EVA anti-abrasion agent to ensure that there are no stains, impurities, consistent colors, and no obvious color differences.
Basic performance testing:
Size and thickness: Use a micrometer with an accuracy of 0.01mm to measure the thickness, ensuring compliance with the agreed thickness, with an allowable tolerance of ± 0.03mm.
Translucency: According to the transmittance testing method, the size of the adhesive film is 50mm x 50mm. After crosslinking and curing under specific temperature and pressure conditions, the transmittance is measured using a transmittance tester, and the value is not less than 90%.
C.Wear resistance test
Wear resistance is a key indicator of sole EVA anti-abrasion agent, which can be tested using a professional wear testing machine. The specific steps are as follows:
- Sample preparation: Prepare a sample of sole EVA anti-abrasionagent according to standard requirements.
- Test condition setting: According to the requirements of the testing machine, set appropriate parameters such as load, speed, and time.
- Experimental operation: Place the sample on the testing machine and conduct a wear resistance test according to the set conditions.
- Result recording: After the experiment, record the wear amount or depth of the sample.
- Analysis and recording of inspection results
Data analysis: Analyze the test results and compare them with standard or reference values to determine whether the performance of sole EVA anti-abrasion agent is qualified.
D.Record keeping: Record the inspection results in detail, and save relevant data and files for future reference and traceability.
3. 물리적 속성 데이터: 3.
| 모델 | DX067TN |
| 모양 | 흰색 입자 |
| 모이스처 % | ≤0.6 |
| 실리콘 함량 % | 55 |
| 복용량 % | 3-6 |
| 온도 ℃ | 120-200 |
| MFI (170℃/2.16kg) | 24 |
| 밀도 | 0.98 |
4.애플리케이션：
신발 밑창, 엔지니어링 플라스틱, 연질 고무(EVA 등), 각종 플라스틱 소재, 케이블 및 기타 재료에 사용됩니다.
5.사용 방법：사용 방법
After mixing DX067TN,sole EVA anti-abrasion agent and its compatible resin according to the formula ratio, it can be directly molded or pelletized for molding.
6.저장 및 만료일:
실온에서 개봉하지 않은 상태로 서늘하고 건조한 곳에 보관하며, 제품의 유효 기간은 24개월입니다.
7. 생산 리드 타임:
대금 수령 후 영업일 기준 3~5일.
8.판매 후 서비스:
당사의 유일한 EVA 마모 방지제의 품질 문제가 있는 경우 언제든지 저희에게 연락해 주세요. 샹시 팀은 조사 후 즉시 피드백을 드릴 것입니다.
9.Websit:
신발 밑창 마모 방지 실리콘에 대한 자세한 정보를 얻으려면 방문을 환영합니다: www.xiangxichem.com
